Cruise Control Demo Instructions

To get started:
Click on the key to put it in the ignition. If your system supports sound, you should hear the engine start.

Next, click and hold on the gas pedal and drag it downwards. The pedal will depress and the word "GAS" below the pedal should turn green to indicate that the pedal is pressed. You should also notice that the speedometer and tachometer will respond.

 
To set the cruise control:
You may RIGHT click on the cruise control stem to enlarge it.

First, drag the toggle switch to the ON position (in the middle). When the cruise control is on, the CRUISE indicator on the dashboard lights up. Once the speed you want is reached, just press the SET button on the end of the stem. The CRUISE SET light will illuminate to indicate that the speed has been set.

 

To test the cruise control:
Once the cruise control has been set, drag the gas pedal upwards to simulate letting off of the pedal. The GAS label below the pedal should turn white when no gas is being applied.

If you drag the gas pedal up and down a few times, you can see the effect being plotted in the external "Auto Cruise Demo" window.